Search results

  1. S

    IP Camera cabling

    Hi guys, I have purchased 50m of cat6 stranded cabling for my CCTV, I am using cat 6 so I am ready for the future or May at some point remove a camera and add a pc. Anyway, I have been reading online about CCA Copper clad aluminium, I have been hearing it's quite not a good choice. im after 100...
  2. S

    Unable to get motion detection to work

    Hi I have discovered the cameras are OEM, there is not mention the cameras are Sony on the unit. I have purchased them from domarsolutions, I have checked the logs from the cameras via the IP and it does detect the motion, but the NVR sometimes it detects the motion and sometimes it doesn't...
  3. S

    Unable to get motion detection to work

    Hi sorry for the late reply, I have been testing the cameras and it's becoming a nightmare. The image you provided does show the output you provided via the ONVIF manager. motion detection is not that great, If I set the cameras to detect full screen it's records when it seems movement. If I...
  4. S

    Unable to get motion detection to work

    Hi I have been testing the cameras with motion detection, it seems that my browser did not display the ok or cancel buttons therefore it did not save the settings. Therefore I entered compatitability mode and it displayed more options, (don't ask me how). After doing so the ok and cancel...
  5. S

    Unable to get motion detection to work

    Directly to NVR's POE Ports
  6. S

    Unable to get motion detection to work

    Hi the cameras I have aren't hikvision, but Sony branded ONVIF 2 compatitable. to setup the camera IP address I had to wire the camera to the PC and set up the IP etc i have tried setting up the motion detection on the NVR, but I believe there is an option in the CCTV cam to setup motion...
  7. S

    Unable to get motion detection to work

    Hi all I have a hikvision NVR 7608 8 port POE. I have 6 IP cams, I'm trying to setup motion detection. i have followed numerous videos and manuals on this, but after doing the suggestions the NVR cannot detection motion via the cam. The camera is motion detection capable, I have changed the...
  8. S

    Cannot view IP camera on hikvision NVR7608

    Hi thanks for the reply, I have just tried your suggestion and it has worked. thanks for your help im trying to set motion detection up, I have followed instructions for then nvr manual and online vids it does not record or sound an alarm when motion is detected, the cam is motion detection...
  9. S

    Cannot view IP camera on hikvision NVR7608

    Hi all I have a hikvision 7608 8 POE port nvr. I have 6 Poe ONVIF 2 compatitable cameras. My internal network address is 192.168.0.1/24 the IP address on the nvr is 192.168.0.15/24 gateway 192.68.0.1 the internal IPv4 address on the nvr is 192.68.1.1 any IP camera attached to the nvr is in...
View older results
Top Bottom