Search results
-
R
CodeProject.AI Version 2.0
Replying to myself: Thanks to Tinman, the problem is solved:) Great work! The issue was that CPAI insisted on seeing the Cameras IP (Dual NIC) as the active IP, and the second PC can't see that. Tinman pointed me to this: This explained how to force the priority to be on the main... -
R
CodeProject.AI Version 2.0
The whole idea of dual NIC is that the main net shouldn't see the cameras network, other than BI itself, I think? BI is on the 192.168.1.xxx network, the cameras are on .50.xxx Both pc's see each other in explorer on the .1.xxx net. CPAI says "active address" is the .50, but no idea why or... -
R
CodeProject.AI Version 2.0
hmmm, I run a dual NIC, and I think the BI PC is on the same network as the other pc with the cameras on a separate net... but I do see CP saying the "active IP address" is the camera one? I'm unclear what I would have to change here... -
R
CodeProject.AI Version 2.0
One more thing: The Blue Iris PC runs 2.4.5 now, shows Mesh active, sees the other PC, and seems to be working like expected. The Second (Non blue Iris ) PC (that shows up in the first BI Mesh status) , is running 2.4.5 ok it seems, but in "Mesh" it shows "Remote Servers in Mesh: 0" , and the... -
R
CodeProject.AI Version 2.0
or reboot, duh, shows now. I ought to know better... but the other one showed without the reboot! thanks! -
R
CodeProject.AI Version 2.0
edit: reboot fixed this, sheesh, should have done that first! I installed 2.4.5 on the second (non BI) PC, and it installed fine, and shows "Mesh" in the control panel. But after an uninstall on the blue Iris PC, I installed 2.4.5 but it does NOT show "Mesh" in the CPAI control panel like it... -
R
IVS error in 5442
EDIT: SOLVED! (I had exported and imported settings to clone the camera, but for some reason the Video Config didn't take properly, thus the GetEvents error. Re doing the "Find/inspect" fixed it, working as expected now. I'm trying to set up an IVS rule in a 5442 ( a cloned cam). I had no... -
R
Blue Iris UI3
Thanks, I may try some of this later but also possible I will give up on this project... just another excuse to get a more modern TV :) I appreciate the attempt (UI3 works great on all the other desktops, phones, and tabs, that I have used) -
R
Blue Iris UI3
I loaded v 262, but no extra button appears:( (yes, v 262 shows in my normal browser, so update was ok.)... I'm afraid the samsung browser is just messed up! Thanks for trying! (btw, everything after "loading h264 player" is also "busy", not "OK", if that matters. -
R
Blue Iris UI3
agreed. Expensive Samsung TV is half obsolete in 3 or 4 years... can't do half of the current stream options. If you can make it work, great, if not, no biggie:) Thanks! -
R
Blue Iris UI3
Thanks.. the red boxes do block the hamburger briefly (attached pic) but they go away if you wait. But the hamburger is still inactive, and "loading H264 player" is "busy" -
R
Blue Iris UI3
same here, but after the red errors went away, I still cannot get the settings to open... just grayed out and loading h264 spinning in the display... can't get past that. I was hoping there was something I could put into the web address or something that would force Java... -
R
Blue Iris UI3
I'm trying to do the same with my (also older) Samsung TV... using the UI3 v 260, it starts to load UI3 but stalls "loading h264". I can't select the settings or options to change to Java or change the res... those options are grayed out as it is still trying to load H264. Did you see that and... -
R
5442 old or new : change default web settings timeout?
I'm using BI, no NVR, so the short timeout is from the cameras I think... -
R
5442 old or new : change default web settings timeout?
on the Dahua 5442 web settings (either older version or new s3 version), the timeout before having to re login is short. Can that be changed? I see no way... when working on several cams it's a pain to have to re login constantly.. and no way to use a password saver either I think?.... thanks -
R
IPC-T54IR-ZE-S zoom setting question.
perhaps try a different substream profile after the find / inspect? I have 3 options: (substream 1,2, or 3) in addition to the mainstream. Just a guess... -
R
IPC-T54IR-ZE-S zoom setting question.
I have two new 5442's with new GUI and I do not see that behavior either. My receive buffer is 6MB. -
R
IPC-T54IR-ZE-S zoom setting question.
did you say that you updated firmware with the newer version (with illuminator adjustment)? If so from where? -
R
IPC-T54IR-ZE-S zoom setting question.
I'm also on same firmware as Ingeborgdot... System Version V3.100.0000000.5.R, Build Date: 2023-05-09 The option to lower the IR for overexposure isn't something I need as those cams use external IR lights (avoiding spiders, bugs, rain, snow, etc) -
R
IPC-T54IR-ZE-S zoom setting question.
well, I THOUGHT I had turned OFF the "Network Settings --> Platform Access --> ONVIF", but apparently not. Maybe I didn't hit "apply". I re did that, and now the find inspect on both 5442 S3 cams is populating the profiles correctly (and seeing the camera properly on the Onvif Find/inspect data... -
R
IPC-T54IR-ZE-S zoom setting question.
Nope! camera works great (after I input the profiles manually)... and I have two 5442 S3's that show this the same way... so messing with FW is not in my plans:) (they are direct from Andy, so I'll stay pat! ) Be nice to solve this for simplicity and since others saw same thing, but I can live... -
R
IPC-T54IR-ZE-S zoom setting question.
ok, tried that.. added Onvif user, (I didn't change camera logins, just added an onvif user), used that new "Temp" login for USER/PW in the find inspect page...and find /inspect gave same data dump. No changes. -
R
IPC-T54IR-ZE-S zoom setting question.
ok, here.. .I tried two different T5442-TZE S3 cams, same data. -
R
IPC-T54IR-ZE-S zoom setting question.
yes, confirmed, the Onvif in the cameras web GUI, and changed to be sure, no effect on above. -
R
IPC-T54IR-ZE-S zoom setting question.
OnVif user/pw is ok. PTZ set correct, I think: Camera user name and pw also correct: but as you can see, find/inspect gives blank profiles. Manually entering profiles: /cam/realmonitor?channel={CAMNO}&subtype=0&authbasic={AUTH64}" and the substream (type=1 or 2) does allow zoom for me on... -
R
IPC-T54IR-ZE-S zoom setting question.
I had the same experience with my 5442 s3. and no zoom... I used "dahua" as "make" in the Network IP Camera settings (Video: Configure) and "IPC-a35 RTSP" as "model", that gave me back both main and Sub, and the zoom function. The find/inspect option did not work for me, like yours. -
R
missing zoom and focus in 5442 camera setup
ok, user error, a varifocal s3 version of the 5442 lost zoom, but I got it back by messing with the video settings... no real idea what happened. BUT, while trying the other cams, I forgot that two are 2.8 lens, NOT varifocal, so of course there are no zoom settings in the cams setup! Too long... -
R
missing zoom and focus in 5442 camera setup
I have 4 varifocal 5442's and suddenly, two are missing the zoom settings in the cameras setup menus (setup: conditions (zoom tab missing). All have ptz enabled in Blue iris (PTZ/Control, enable Pan/Tilt/zoom), and I tried rebooting the cams, PC, BI, the varifocals just lost that part. I tried...