Search results

  1. C

    Unable to pull down PTZ presets in Blue Iris 5

    OK, Thanks
  2. C

    Unable to pull down PTZ presets in Blue Iris 5

    I logged into the web GUI and found the ONVIF tab but the only options are under network connection. Only options are, "Reset Defaults", "Refresh", "Save". I tried both but no luck. Also, I do have another PTZ camera and I went through the Config process with it and it pulled down the presets...
  3. C

    Unable to pull down PTZ presets in Blue Iris 5

    Hello Tony and thanks for the reply. That's what I have been doing, hitting Find/Inspect. I have checked the password and the IP address and both appear to be correct. I got the IP address through Amcrest IP config app. Below is what is coming back when I hit Find/Inspect. Requesting...
  4. C

    Unable to pull down PTZ presets in Blue Iris 5

    I am currently running the Blue Iris, version 5, with several cameras and 1 Amcrest PTZ camera. I programmed the PTZ preset using the Amcrest Web UI. All presets work perfectly with the Amcrest web UI. The problem is when I configure the camera in BI, it is not pulling down the preset for the...
  5. C

    Blue Iris schedule help

    OK thanks. I may have to try this if I don't have it fixed.
  6. C

    Blue Iris schedule help

    It is checked. I think I have it fixed. I have changed my internet provider recently and had some problems after that with blue iris because the IP address kept getting changed but it was most likely something I did that got it messed up.
  7. C

    Blue Iris schedule help

    I think I figured it out. I have unchecked the "override global schedule" and It will respond when I manually change the profile. I will have to wait till next year now to see if it works. Thanks for the help.
  8. C

    Blue Iris schedule help

    I can change the camera's presets using the Blue Iris interface. The settings I used are in the Cameras schedule tab, on profile change, button. I have attached a screen shot of the cameras schedule tab. I may have a check in the wrong box, not sure.
  9. C

    Blue Iris schedule help

  10. C

    Blue Iris schedule help

    I have three schedules set up in blue iris. 1-Home, 2-Away, and 3-Night. I have one camera that has two presets. In schedule 1 its set to preset 1. In schedule two, set to preset 2. I want it to remain on preset 1 when I am at home and got to preset 2 when I am away. Schedule 3 runs from...
  11. C

    Can't get to blue iris web ui and not seeing cameras on ophone

    Figured it out. Anti Virus did an update which blocked it. I guess I should have checked that first. Thanks
  12. C

    Can't get to blue iris web ui and not seeing cameras on ophone

    Both
  13. C

    Can't get to blue iris web ui and not seeing cameras on ophone

    Its a static ip address that has been up and running for a few years. I know BI has been pushing out several updates and I am wondering if this could have created a problem. The best I can tell is the IP address have not changed. Im having trouble logging into his computer because Teamviewer...
  14. C

    Can't get to blue iris web ui and not seeing cameras on ophone

    I have blue iris running in two separate locations. In one location I could not get into the app on one of my tablets but I could on the other one and my phone. At the second location we cannot log into the mobile app or the web UI. I uninstalled the server from my tablet several times and...
  15. C

    Active Profile changes

    Where in the camera settings can you change active profile for each camera. I thought it was under the "General" tab for each camera. I am trying to set two cameras to be inactive during a certain profile, Off when home, On when away. Can't figure out where it moved to.
  16. C

    Strange Problem after lightening strike

    Already got a new APC surge protector on the way. Usually take a hit once a year at the pump house which is a good ways from the house. And it usually get the automatic gate opener. Im thinking in came in thru the buried either net cable.
  17. C

    Strange Problem after lightening strike

    There was a discrepancy in subnet. I fixed that and uninstalled and reinstalled and its working fine now. Lightening does strange things though. Had to uninstall and reinstall the wifi cameras, and three nest smoke alarms. Once again thanks for your help! I could not survive these camera...
  18. C

    Strange Problem after lightening strike

    Had a bad lightening strike a week or so ago and it tripped out a battery backup/surge protector. The surge protector reset but unfortunately it took out a ethernet switch. I have replaced the POE switch and I can log into the camera (Amcrest) thru the Amcrest UI setup page. The problem is...
  19. C

    Schedule/Profile set up

    I am trying to set up blue iris so that it does not record and send out alerts during certain hours of the day. But I also want the video stream to be visible online during these times. It seems like I have seen a "continue to stream" check box somewhere but I cant find it now. Would...
  20. C

    Blue iris evaluation version

    I am currently running BI 5.7.7.18 (06/28/2023). Renewed my yearly support plan back in February. Now all of a sudden I see "Blue Iris Evaluation Version" on all cameras and it says my subscription expired on 02/02/23. I see some older post about this from back in 2019. Has anyone else had...
  21. C

    Unable to access BI from IPhone

    Its a private network. I reset BI to a known version that was working, same problem
  22. C

    Unable to access BI from IPhone

    Ok Thanks, I will reach out to the ISP IT Tech and get him to check that. May be next week with the holiday coming. And by the Way Thank You for your service.
  23. C

    Unable to access BI from IPhone

    Ip address is static and he cannot connect thru the lan or wan IP. It may be something has changed in the firewall setting.
  24. C

    Unable to access BI from IPhone

    Zero Tier was installed for use with my home set up. Its working fine, just has a little lag in it.
  25. C

    Unable to access BI from IPhone

    Not using zero tier on this system
  26. C

    Unable to access BI from IPhone

  27. C

    Unable to access BI from IPhone

    I turned on the P2P on the Amcrest side to see If i could get them online. Server has a static IP address and ISP tech set all of that up. Using a unfi set up with fiber. System has been online for over a year with no problems.
  28. C

    Unable to access BI from IPhone

    Have not been able to access my cousins BI from my IPhone or his, in the past several days. Have Amcrest cameras and I have checked the P2P settings on all cameras. I can access them from the server computer by entering the IP address and logging into the cameras. I have double checked the...
    • Cleve
    • Thread
    • Replies: 13
    • Forum: iOS
  29. C

    Issue with camera preset on profile change.

    I have one camera set to change preset from 1 to 2 upon the away profile which is triggered when I am outside the geofence. The camera moves to preset 2 but will not hold. After about 5-10 seconds, it returns to preset 1 even though the schedules shows away (Outside Geofence). Any Ideas what...
  30. C

    Blue Iris, Zerotier, and Geofencing

    Hello, I just recently install Zero Tier as suggested by IPCam and it seems to be working great. I can view my cameras from outside the lan, most of the time without issue. At times though the apps appear to be turning themselves off on their on. The only real issue I am having is that...
Top Bottom