Search results
-
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
then open PNG & save to JPEG in highest possible quality... but please not resize.. -
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
Andy - do you have original snapshots in full resolution (4Mpx) done by camera web interface? Those images are resized and I think (not 100% sure) there are resized from small resolution (so probably secondary stream).. very soft, lack of sharpness & details everywhere... no good... -
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
Andy - please don't fight for firmware "custom" versions with reported fixes. Only for fixing reported bugs and issues in the general Dahua firmware. Custom versions are good for a short period of time. Dahua can prepare a special firmware version with specific modifications for a large... -
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
there is upper limit of it.. defined in internal firmware settings... Older TIOC-PRO firmwares allowed for more... It's a pity that it can't be edited in manual settings.. My main problem with automatic modes (and the entire AI-SSA) is that Dahua should introduce a simple, three-position... -
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
OK - a very important comment for those testing their new 54PRO (and it also applies to the 34PRO/Color4M/TIOC-PRO)... These cameras have a dual system for "amplification" of brightness at night. The first, the classic gain, also called ISO, is an analog gain on the sensor itself. This analog... -
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
OMG.. this latest firmware looks very bad... gain control is going out of control.. -
T54PRO-ZE versus T5442-S3 in low light
there is a few video comparisons of 54PRO to 54IR on main thread.. but ok, as you want I reply here... you should do video comparison with some human movement of both cameras.. best on 1/50 (1/60) or 1/100 (1/120) and gain limited to 50-60.. With 1/10 you didn't even stressed any of the cams... -
T54PRO-ZE versus T5442-S3 in low light
@alekk I have long list of comments but I propose that you repost this posts with pictures on main thread of 54PRO... Historically when any new camera was released and people did comparison to older models - always did on main thread on new camera model... -
Using POE NVR without providing power
Many times I added second camera in place where I had only 1 CAT5 cable - by splitting 1,2,3,6 and 4,5,7,8 pairs into two separate plugs on both ends (always connected as 1,2,3,6).. Works like two separate CAT5 cables plugged to two separate POE switch ports - the only limitation is that... -
Using POE NVR without providing power
there are 'POE power blockers' on the market.. or some stupid cheap ethernet switches.. cutting wires in CAT5 cable don't work - POE power can be sent over the same wires (1,2,3,6) as fast ethernet data.. -
Using POE NVR without providing power
depending of NVR and firmware generation, you can have or not specific options in camera registration -> POE menu.. -
Using POE NVR without providing power
And why you want to do it like this? You can disable POE power on switch or NVR on this port... Also if you provide power to camera using camera power-in cable, it should switch to it automatically (ignore POE).. -
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
why you want to resize? you should use native resolution... you can try also check if third stream (which can be resized) have the same problem? -
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
All WizColor / AI-ISP cams have TOTALLY different video workflow comparing to older Dahua cameras.. Many settings works very different... The same was on TIOC-PRO (34PRO)... You can try to enable full WDR (with values >= 50) - it reverse some (not all) original Dahua video processing - to test... -
PoE+ power issues on ~90m Cat6 run — need advice
is the cable 23AWG? this is more important than cable is CAT5 or CAT6... You can try to use different switch, but POE++ will not solve any problem here (because camera will negotiate POE+ only).. Also POE+ and POE++ are using the same voltage... Both HIK & Dahua are offering own POE switches...- steve1225
- Post #5
- Forum: Accessories
-
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
3449 TIOC or 3449 TIOC-PRO? if TIOC-PRO (with 1/1.8" sensor), then there shouldn't be that difference.. TIOC-PRO have the same AI-ISP / always active HDR technology. Probably something was wrong configured.. -
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
triggering other channels is for PTZ cams.. never saw this to trigger multiple recordings/activate alarm outputs/smart lights etc.. if you want to have full house lights/alarms activated by each camera, you have ALARM-OUT output on 5xxx NVRs - where you can connect small relay and turn-on any... -
【Review】IMX482 1/1.2" 5.8um Camera, King of The Ultra Low Light Camera World?
CCTV cameras require NIR (Near IR) enhanced sensors.. Normal sensors for DSLR like cams don't have support for enhanced IR... Also prices for those sensors are very high.. More interesting for today standards for next generation CCTV cams should be using Quad Bayer Sensors, like used today in...- steve1225
- Post #6
- Forum: IP Cameras
-
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
there are multiple reports that Windows 11 update (some security patch? defender/firewall rules?) blocks Dahua web service plugin on many computers... the only known solution for now is to delete webplugin from computer... for me (Mac user, so there is no plugins at all) on modern cams all... -
Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713
yes... it's fix, not firmware.. so you should upgrade to any normal firmware you selected.. and then, if you have missing RTSP method you can FIX that firmware using this file... this fix don't change firmware version or date.. simply enable RTSP...- steve1225
- Post #405
- Forum: EmpireTech Andy
-
Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713
but on generic firmware RTSP can be disabled... here you will find firmware fixed, which enables RTSP: https://files.dahua.support/Firmware/Rejestratory/NVR/RTSP%20fix/- steve1225
- Post #403
- Forum: EmpireTech Andy
-
Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713
change HD/no HD in DMSS on this channel (primary/secondary stream).. if this will not help, try different encoding settings on camera (h264, CBR, 2048kbit)...- steve1225
- Post #401
- Forum: EmpireTech Andy
-
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
On Dahua website there is stable DH_IPC-HX5XXX-Fourier_MultiLang_PN_Stream4_V3.146.0000000.2.R.250827 https://www.dahuasecurity.com/support/downloadCenter/download-search?keyword=5459 Newer BETA firmware with some fixed auto-settings for night (V3.146.15OG000.0.T.250928.bin) You can get from... -
Dahua WizColor 5x59-PRO and SmartLight 5x59-IL new series
https://www.dahuasecurity.com/support/downloadCenter/download-search?keyword=5459 Fourier firmware... -
PTZ5A4M-25X Tracking issues - Dahua SD5A425GA-HNR
they decreased size in gen II a lot... -
Dahua NVR NEXT GUI
No.. I will not be - to old platform / SOC (2016?)... For now UI 5.0 is only for 2025 NVRs releases (5xxx-EI2 & 5xxx-XI-PRO) plus there is beta firmware for 5xxx-EI from 2022. -
AcuPick
which AcuPick function? search by image (clicking on icon next to each person/vehicle on footage to find any other footage of similar looking persons/vehicles) or search by attributes (show me all males in white t-shirt or blue suv from toyota)?- steve1225
- Post #30
- Forum: NVR's, DVR's & Computers
-
Best POE/ONVIF 180 Degree FOV Dome Camera?
new Mini huble is a new release and contain all newest features (Xinghan AI models, AI-ISP video night processing).. It should be in the similar price range as Axis you put (if you order by Andy)... ps. please remember that NO ONE on the market is offering birds tracking on PTZ cameras.. Auto... -
PTZ5A4M-25X Tracking issues - Dahua SD5A425GA-HNR
True first new PTZ platform release, using new Xinghan & Ai-ISP (Flowing Light) technologies... Prediction of what awaits us in 2026 when Dahua should release new PTZ cams in all main lines (4 year product cycle). -
AcuPick 2.0 - NEW AI features for Dahua cams / NVRs (presentation)
Demo of text defined alerts / alarms...