Search results

  1. 1

    I have a situation that I would like any of you network gurus to consider

    That something I was going to try. Looks like I'll be ordering a new camera from Andy. Is the 54IR still the best all around?
  2. 1

    I have a situation that I would like any of you network gurus to consider

    Solid copper.
  3. 1

    I have a situation that I would like any of you network gurus to consider

    I appreciate the responses! I'm probably going to order a few things to try and get back on this next week sometime.
  4. 1

    I have a situation that I would like any of you network gurus to consider

    Yes, it happened all of the sudden. In the past few minutes, I tried an old PoE switch I had on hand. Using the Extend Mode it was able to connect. However, the connection was too slow and clips were very choppy with stuttering in them.
  5. 1

    I have a situation that I would like any of you network gurus to consider

    I looked at the 54IR connector. The pins weren't shiny like new, but I didn't see any obvious corrosion. I also replaced the ends on the cable and that didn't change the results. That 54IR has been in service for probably 3 years or so with no issues.
  6. 1

    I have a situation that I would like any of you network gurus to consider

    I have a POE switch in my garage, and from that switch a 200 foot ethernet cable to a 54IR camera from Andy. A few days ago this camera quit working and showed no signal in Blue Iris and I was also unable to connect to it via a web browser. I took an very old spare camera that I had and...
  7. 1

    54IR operating temperature

    Thanks for the reply. Would you mind sharing how you get the camera temp to display like that?
  8. 1

    54IR operating temperature

    I was adjusting one of my 54IRs today and notice the outside of the camera ball felt pretty hot. I got my thermal heat measuring gun and it showed the temperature to be 127°. Is that within the range? Thanks
  9. 1

    Question about IVS alerts from camera via ONVIF

    Thanks @wittaj, I’ll dive into this configuration later today. Appreciate the reply!
  10. 1

    Question about IVS alerts from camera via ONVIF

    I’m using onboard IVS triggers from my 54IRs to trigger alerts in BI via ONVIF. Recently, I’ve decided to play around and see how UniFi Protect works, since I have a full UniFi network. Protect supports third party cameras by using ONVIF to receive alerts from each adopted camera. In order...
  11. 1

    It looks like better ONVIF support is coming to UniFi Protect

    You have to buy an AI Port for each third party camera, right?
  12. 1

    It looks like better ONVIF support is coming to UniFi Protect

    Me too, this sounds promising.
  13. 1

    It looks like better ONVIF support is coming to UniFi Protect

    Yeah, Protect must report them differently for some reason. I don't expect to stop using BI, Since I have a Unifi network, I thought I'd just play around with Protect to see how the third party camera support worked.
  14. 1

    It looks like better ONVIF support is coming to UniFi Protect

    Mine are not right. They are square and don't have the vehicle in them. Any idea why this is happening?
  15. 1

    It looks like better ONVIF support is coming to UniFi Protect

    Did you try Low sensitivity?
  16. 1

    It looks like better ONVIF support is coming to UniFi Protect

    I've never used Smart Detection, sounds like it may not be so smart. :mad:
  17. 1

    It looks like better ONVIF support is coming to UniFi Protect

    I turned this on and I'm getting motion events sent to Protect.
  18. 1

    It looks like better ONVIF support is coming to UniFi Protect

    All 12 are set up the same for the Primary and Secondary streams.
  19. 1

    It looks like better ONVIF support is coming to UniFi Protect

    As a test, I adopted 12 of my 54IRs this afternoon. It's strange that some show up as HD and others as 2K.
  20. 1

    It looks like better ONVIF support is coming to UniFi Protect

    Looks really interesting. All 17 of my 54IRs are configured to use on-board IVS and AI to trigger ONVIF alerts in BI. While testing Protect, I noticed that the iOS app interface seemed better than the BI app for me. This could possibly allow me to use my camera configuration as is and then use...
  21. 1

    It looks like better ONVIF support is coming to UniFi Protect

    I'm running a Ubiquiti Dream Machine Pro and the latest release version of Protect. I have created motion zones with the highest sensitivity and to record events only. Getting no recordings at all. Continuous recording works as expected.
  22. 1

    It looks like better ONVIF support is coming to UniFi Protect

    None of my 54IRs from Andy are triggering motion events in UniFi Protect for me. I guess not all cameras types are compatible.
  23. 1

    IPC-T54IR-ZE-S3 night full color settings?

    Thanks @wittaj, I would like to be able to be able to see someone walking up to 20' from the camera and flood light. Once I get a flood light set up, I'll do some testing. I'm asking about lumens because I want something just bright enough and not super bright considering neighbors.
  24. 1

    IPC-T54IR-ZE-S3 night full color settings?

    For those of you running a 54IR at night and getting full color with a motion floodlight, how many lumens do you need? Also, what are good settings to get full color? Thanks!
  25. 1

    It looks like better ONVIF support is coming to UniFi Protect

    Also, I adopted 5 54IRs all running the exact same firmware. Unifi Protect sees them with different recording resolutions. I don't really ever see Protect replaces BI as my solution, but I was curious to test it out after the recent update.
  26. 1

    It looks like better ONVIF support is coming to UniFi Protect

    Same here, I adopted several 54IRs, set up motion zones with the highest sensitivity and I'm not getting any events recorded. Zones are the only option I see, no line crossing. I'm currently running Protect v7.1.60.
  27. 1

    AI confirmation settings

    No ALPR, strickly slow moving vehicles, people and wildlife. Are you concerned about the 20 lag in alert notifications because of the "impossible" object in the cancel box? I really appreciate the reply.
  28. 1

    AI confirmation settings

    Is there a general good place to start with these settings? Here's what I have right now. Would love comments and suggestions. Thanks
    • 105437
    • Thread
    • Replies: 3
    • Forum: AI
  29. 1

    Alerts for any wildlife possible?

    Context is using the BI built in AI.
  30. 1

    Alerts for any wildlife possible?

    Using the built-in AI, is it possible to get AI confirmed alerts for any wildlife? Would like something more general instead of dog, cat etc. Thanks
    • 105437
    • Thread
    • Replies: 6
    • Forum: AI
Top Bottom