Search results

  1. Bruce_H

    Quick question about camera status window

    The key rate for both your main and sub are not 1.0, you would have to go into the camera web page and adjust the setting on each camera, something like shown below, you want to have the I Frame interval set the same as the FPS, I have been told that a good number is 15 for the FPS and the...
  2. Bruce_H

    Increasing recording sensitivity

    I am pretty sure that when you say recording sensitivity you actually are asking how to make the camera more sensitive to motion. First question is are you using AI (artificial Intelligence) or just the regular motion setting in BI. If you are just using BI motion then it is all controlled by...
  3. Bruce_H

    Quick question about camera status window

    A quick click on the help button gives this info, but does not clarify what the second number refers to, I am pretty sure that it is not the sensor size, as one of my cheap camera's is 0.9 and my higher resolution cameras are 0.3 Pixels This is the number of picture elements in each image—the...
  4. Bruce_H

    Blue Iris - using http or json to get ptz camera patrol pause status

    Perhaps an email to support might help get this feature implemented!
  5. Bruce_H

    Primary AI with an additional model... which one is used?

    They both identify cars as both models are used!
  6. Bruce_H

    Blue Iris - using http or json to get ptz camera patrol pause status

    Did you look at the camera setup screen, it is right there " Resume cycle/schedule after inactivity (sec)"! Never tried it so I am not sure it will do what you want! From the built in help file (which is worth reading) Event search-back also applies when using the option on the PTZ page to...
  7. Bruce_H

    Primary AI with an additional model... which one is used?

    Here is what I have selected on the AI tab, all the models get used for me
  8. Bruce_H

    Blue Iris Remote WAN address changes after system reboot?

    Sorry, I don't have an I-Phone or use the BI app, I only use UI3 and the Open VPN server built into my Asus Routers, it works flawlessly for me!
  9. Bruce_H

    Primary AI with an additional model... which one is used?

    What do you have selected for additional models on the BI setting AI tab, to the best of my knowledge BI internal AI will use all selected models, If you <Ctrl> double click on an alert it will tell you what models are being used!
  10. Bruce_H

    Blue Iris Remote WAN address changes after system reboot?

    Your external IP will change from time to time, that is why people use a DNS service (Dynamic Name Service) there is a section in the help about using a dynamic DNS system from BI using the last part of your serial number have you looked at that in the BI help?
  11. Bruce_H

    UI3 with Mikrotik router

    In BI what IP address are you using for the web server, is it set to the same IP or the IP of the other NIC? Is this the guide you used to configure the port forwarding on your router Port Forwarding on Mikrotik: Step-by-Step Guide?
  12. Bruce_H

    Lost Live Overlays

    I would suggest that you might want to consider using the timestamp that the actual camera provides, it makes it easier in my mind, then it is always on the video that is recorded, but perhaps you have other info than just the timestamp!
  13. Bruce_H

    Lost Live Overlays

    Just checked my system running 6.0.4.4 and the live overlays are working properly on the MP4 export;here are my export settings
  14. Bruce_H

    Using different HDD for different cameras

    For each camera there is a setting on the "Record" tab that allows you to pick any folder that you have defined on the "Storage" settings in the main program setup. In the storage setup you could rename one of the unused folders to somethimg like "New1" on the second drive then setup some of...
  15. Bruce_H

    Recording stop once in a while

    Have you done a DB repair? Perhaps post a screen capture of your storage settings for "New"
  16. Bruce_H

    Recording stop once in a while

    Those errors Clip file Exists are not normal, sorry I don't have any suggestions, I have never seen this error before! Do you have the exclusions in place for your AV software, I am guessing something is interfering with the disk writes!
  17. Bruce_H

    Clip list loads very slowly

    Just a couple of other thoughts, what video resolution do you have UI3 set too, not sure if it has any effect for browsing videos? Does UI3 work OK on the actual BI machine or is it slow also?
  18. Bruce_H

    Clip list loads very slowly

    So what happens when you try to browse the event archive directly from the BI console? How are you connected to BI when browsing the events from UI3 (Web UI) is it via the local wireless or are you outside your home network? Are the cameras connected via ethernet or wireless, do they connect to...
  19. Bruce_H

    Was looking into mini computer for a new Blue iris build. Thoughts on this

    Just an fyi I am using an ASROCK DeskMeet X600 Series to run BI for over a year now, I have a 10TB surveillance rated drive in it with an AMD Ryzen 7 8700G cpu, works great with 7 cameras CPU usage idles at 3% and GPU at 4%.
  20. Bruce_H

    Was looking into mini computer for a new Blue iris build. Thoughts on this

    Did you read the reviews on Amazon, one of them is not particularly good, referring to very slow performance other reviews indicate the performance is good, but they do not mention what they are running for applications most of them agree that it gets very hot which could cause heat throttling (...
  21. Bruce_H

    Unable to Export to .bvr

    Are you referring to this setting; if so then yes!
  22. Bruce_H

    Unable to Export to .bvr

  23. Bruce_H

    Blue Iris won't load after Windows 11 update March 2026 - avnetsdk err 126

    As expected after I removed the ConfigTool, the file avnetsdk.dll, no longer exists and Bi is working normally! Interestingly I looked at the sdk_log.log in the "C:\Program Files\Blue Iris\sdk_log" and I have this same error and it has no effect on my BI program; here is the line that is in the...
  24. Bruce_H

    Blue Iris won't load after Windows 11 update March 2026 - avnetsdk err 126

    Both of my systems are running BI 6.0.4.2, which is the most recent release, and the file does not exist in the BI folders, only in the ConfigTool from Dahua, I guess I could remove the ConfigTool and see if it causes BI any issues!
  25. Bruce_H

    Poor AI Detection Speed

    Have you tried selecting the other RTX 5090 in the drop down list, I thought I read something about 1 of them not working when there was two in the list, don't ask me where I read it since I am not sure about this at all!
  26. Bruce_H

    Blue Iris won't load after Windows 11 update March 2026 - avnetsdk err 126

    So would that confirm that it is not a part of BI then?
  27. Bruce_H

    Unable to Export to .bvr

    BVR is avialable on my system
  28. Bruce_H

    Blue Iris won't load after Windows 11 update March 2026 - avnetsdk err 126

    @wittaj you say that your BI system has never had the ConfigTool installed, if that is the case where is the avnetsdk.dll located on your system? Just curious!
  29. Bruce_H

    Blue Iris won't load after Windows 11 update March 2026 - avnetsdk err 126

    Yes it is normally faster for common issues if someone else knows a solution, BI support does not participate in this forum.
  30. Bruce_H

    Was looking into mini computer for a new Blue iris build. Thoughts on this

    Is this the computer you are looking at? https://www.amazon.com/MINIX-NEO-Z350-0dB-Computer-Multi-Tasking/dp/B0F3JD9Z74?th=1, hopefully you will be connecting via ethernet and not using all wireless connections!
Top Bottom