Search results
-
New Reolink Wired POE Doorbell Cam ?
I have a Unifi gateway, so I was able to use Teleport (Wireguard) through their Wifiman app. All I did was generate a link in the settings on my gateway, emailed that to my phone, then the app did the rest. I didn't need to set anything up, and there aren't really any settings in their app, just... -
New Reolink Wired POE Doorbell Cam ?
How do I keep my iPhone from turning off VPN? -
I decided to ditch Ring and made my dumb doorbell smart with Hubitat and Blue Iris
My daughter and her friends always tend to gather on the front porch, so I was constantly needing to snooze my Ring motion notifications when they're outside. This is why I went with the doorbell press, for now. I may look at adding motion later on when there's less little people running around...- Ri22o
- Post #6
- Forum: Camera Installation Questions
-
I decided to ditch Ring and made my dumb doorbell smart with Hubitat and Blue Iris
I could have installed the Shelly in parallel, basically just using it as a sensor, but I thought it best to use its relay to set off the chime when the button is pressed.- Ri22o
- Post #4
- Forum: Camera Installation Questions
-
I decided to ditch Ring and made my dumb doorbell smart with Hubitat and Blue Iris
Technically, yes. Pressing the doorbell button closes the contacts in the Shelly, causing the chime to go off. The Shelly itself does not trigger BI. Hubitat is monitoring the Shelly and when it sees its state change to ON, then the rule sends the HTTP trigger to BI for the snapshot. From there...- Ri22o
- Post #3
- Forum: Camera Installation Questions
-
I decided to ditch Ring and made my dumb doorbell smart with Hubitat and Blue Iris
I know there are probably discussions about this all over, but I wanted to share my recent experience and what worked for me, in case anyone else is considering ditching their Ring, Arlo, Nest, etc doorbell. I have been wanting to get rid of my Ring doorbell for a while, but I just couldn't...- Ri22o
- Thread
- Replies: 9
- Forum: Camera Installation Questions
-
How do you help your neighbors with recommending and installing cameras?
I mention dash cams all the time, and the usual response is "I need to get one", but no one ever does. Next thing you know they get rear ended by a semi on the interstate. If people only knew how crappy all of the other solutions are, not to mention the security risks and them being able to...- Ri22o
- Post #16
- Forum: IP Cameras
-
How to trigger Blue Iris camera via external device - Anyone?
Old post, but it's what I am working on right now. I have two issues. If I fix one, the other breaks. If I fix that one, the other breaks. I am using http://BI-server-IP:BI-port/admin?camera=x&trigger=1&user=username&pw=password via Hubitat to trigger a camera when my doorbell is pressed. In...- Ri22o
- Post #18
- Forum: General BI Talk
-
How do you help your neighbors with recommending and installing cameras?
My neighbors have never really asked me, but I have had a couple friends and coworkers ask. I give them information and a shopping list, but they never follow through with it. One friend had his zero turn mower stolen. He asked about a system, I spec'd one out. As a short term solution he put up...- Ri22o
- Post #13
- Forum: IP Cameras
-
How do you help your neighbors with recommending and installing cameras?
Just keep my mouth shut when they are looking at Ring, Nest, Arlo, Blink, etc. No one wants to put in the time and effort for a much better system.- Ri22o
- Post #6
- Forum: IP Cameras
-
New Reolink Wired POE Doorbell Cam ?
Yea, going to just use the 54IR above the door bell, triggered by the Shelly. -
New Reolink Wired POE Doorbell Cam ?
Yea, just this one. https://a.co/d/0eIuh67V -
New Reolink Wired POE Doorbell Cam ?
Huge strides were made, now I just need to get it all off the bench and installed. When the doorbell is pressed, the Shelly is triggered which also ding dongs the chime. Hubitat sees the trigger from the Shelly and then sends an HTTP command trigger to BI. Then, with that external trigger, BI... -
New Reolink Wired POE Doorbell Cam ?
I'm taking baby steps with it right now. I currently have my test Shelly working and sending my phone notifications through Hubitat regardless of whether I am on wifi. I have nothing set up in HA other than ESPHome, which was the only reason I set it up. I am building temperature controllers... -
New Reolink Wired POE Doorbell Cam ?
I completely agree. I don't think I have ever answered the doorbell through my phone. I'm looking into using a Shelly relay at my door chime to trigger my Hubitat and send a Pushover notification. If I can get it to include a snapshot from the 54IR above it, that would be even better. -
New Reolink Wired POE Doorbell Cam ?
Yea, the 54IR is going to stay there. I considered that route, as well. Go back to a dumb doorbell and come up with a way to receive triggers when someone pushes the doorbell. I previously had modified a Zwave door sensor and attached it to my doorbell chime. When the "door" would close, I... -
New Reolink Wired POE Doorbell Cam ?
I just set up Teleport and it was as easy as generating a link, emailing it to myself, and then clicking a couple buttons on my phone to accept. Would have taken longer, but I already had Wifiman installed on my phone. I disconnected from Wifi and tried connecting to the BI Web UI link on my... -
New Reolink Wired POE Doorbell Cam ?
Actually, it looks like my Unifi Teleport will work similarly to Tailscale. I'll see if I can get that set up and working. -
-
New Reolink Wired POE Doorbell Cam ?
Unfortunately when I switched to fiber I didn't know they use CGNAT, which kills my ability to use a VPN. I just need to call and order a static IP, I think it's $10 per month. I've been messing around with the doorbell in BI and narrowed down which trigger is for the button, so I think I can... -
New Reolink Wired POE Doorbell Cam ?
What about Pushover? Can I do anything with that? My guess is I wouldn't be able to use it for the button press, only motion alerts. -
New Reolink Wired POE Doorbell Cam ?
Ok, I'll need to look into Home Assistant, then. I use Hubitat for all of my home automation, but do have a SFF PC running HA for programming some project ESP32s with ESPHome. I don't much care about Neighbors, there's never anything fun on there. -
New Reolink Wired POE Doorbell Cam ?
How is everyone using this as a Ring replacement with BI? It just dawned on me that my camera network that this would be plugged into doesn't touch the internet, so the Reolink app won't work... -
Total moron destroyed my garage door
- Ri22o
- Post #5
- Forum: Camera Captures
-
Total moron destroyed my garage door
My late wife, bless her heart, was leaving one morning and had our infant daughter with her. Her car was in the garage, door open, running with our daughter in the back. My wife, meaning well, decided to lower the garage door a few feet "to make it harder for someone to take the car with our...- Ri22o
- Post #4
- Forum: Camera Captures
-
New Reolink Wired POE Doorbell Cam ?
I saw that, too, but literally saw a listing on Amazon with the option of white or black. I clicked back on it, and now it's only the black one. -
New Reolink Wired POE Doorbell Cam ?
Well, now the white isn't showing when I search, so that may answer the question for me. -
New Reolink Wired POE Doorbell Cam ?
I considered grabbing both and returning one; I don't have any issues with returns to Amazon. -
New Reolink Wired POE Doorbell Cam ?
Yea, there's not much I can do with how narrow the porch is. I dabbled with the lower one in corridor mode, but obviously opted out for some reason. -
New Reolink Wired POE Doorbell Cam ?
That's this one. ;) With the views I currently have I'm undecided on if the additional vertical FOV is worth $15, but I also see a lot of yard with the wider FOV. I will be moving the doorbell to the trim next to the brick mold, for ease of running cabling, so that may show more siding unless...