Search results

  1. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    @green1 May I request that you update the subject title to reflect the current status of the firmware? It would be best to avoid confusion if anyone finds this forum. Current title DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE! Change to or similar DH-DB6I Doorbell, latest firmware with...
  2. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Copy of the firmware binary that supports local API. Use Config Tool to install. V1.000.0000003.1.R.20230819
  3. Galaxy Explorer

    Honeywell Performance series Nvr reset.

    That looks like the 3rd generation, so I wouldn't recommend it. Try contacting Honeywell support and request the firmware from them.
  4. Galaxy Explorer

    Honeywell Performance series Nvr reset.

    Firmware for HEN16102 attached.
  5. Galaxy Explorer

    Honeywell Performance series Nvr reset.

    Previously there was a backdoor to reset the password however if the firmware was patched you'll need to connect over serial to erase the configuration. I've created a guide on how to do it, based on information found elsewhere.
  6. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Most likely not, I don't know for sure but most likely the regional versions differ in WLAN power levels. NA/Canada regulations allow for much higher power levels than Europe.
  7. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Just place the .bin file on the root. Alternatively, try the ConfigTool method.
  8. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Try the SD card recovery procedure
  9. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Enter the details into the camera search box/window which is using top right of the screen.
  10. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Username = "admin" Password = <safety code printed on the camera/doorbell label>
  11. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    I didn't realise the wired version also had an internal battery! :) ... I must say it doesn't get very hot here in London but I can see how that could be problematic with direct sunlight.
  12. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    This is a common problem with all Lithium Ion batteries, so it's not a Dahua thing. I have the non-battery (hard wired) version, I'd recommend that one! :)
  13. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    The DB61 is so underrated, it's far better than anything else on market. Local storage, local API, image resolution is far superior, etc.
  14. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    It was pushed from Imou. I did ask Imou support for a copy of the binary but they refused. You could try loading the previous binary as per my earlier post and with any luck you may receive this update. Note these files are European firmware so it may differ for North America versions, typically...
  15. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Yes I've seen this for RTMP streaming also, AAC is the most compatible.
  16. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    I can't imagine why it shouldn't work if you can successfully stream over RTSP and ONVIF. My DB61 is connected to HA using Dahua API and ONVIF without issue. ONVIF provides some additional features. e.g. reboot. I did see a situation in the past where the RTSP failed when complex passwords with...
  17. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Yes, it works nicely as you describe. doorbell_alarm_local goes to unsafe when the call button is pressed It doesn't work for me neither but the general doorbell_motion_alarm works perfectly I'm not entirely sure but it could a compatibility issue with the encoding, try using basic H264 by...
  18. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Yes, I am using the custom integration from rroller You are probably using the wrong password. It is the "safety code" which is printed on the device label. If you can't find it, scan the QR barcode and decode it from the string.
  19. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Dahua Imou have just pushed a new firmware version: version=1.000.0000002.1.R,build:2023-08-19 I can confirm that the local HTTP API using CGI is maintained :)
  20. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    I was already using this version so I didn't need to change, it's probably related to WiFi disconnecting during the firmware upgrade/downgrade process. Try using the SD card method as described here
  21. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Copy of the firmware binary that supports local API. Use Config Tool to install.
  22. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    I note that Dahua have released new DB61 firmware with build date (09-03-2022) filename revision of (V1.000.0000000.7.R.220615). The minor revision seems to be different from the initial post which includes feature change (.020000000). Is anyone running this version? Of course I'm interested to...
  23. Galaxy Explorer

    New Dahua Cameras will not remember NTP server

    @Gyula614 having read your post on the other thread you just reworded what I wrote above ;)
  24. Galaxy Explorer

    Dahua model number letters

    Here is another resource Understanding Dahua IP camera part codes
  25. Galaxy Explorer

    A New Doorbell

    I am using the recently developed Imou Life integration for my DB11 doorbell. Though it's cloud based, the event notifications work reliably. This integration would also work with your DB6I.
  26. Galaxy Explorer

    Imou Ranger 2: Access via ONVIF

    Set encoding format to H264 using the ConfigTool and then it should connect using port 80.
  27. Galaxy Explorer

    Review-Dahua DB-11 Video Door Bell

    Factory reset it using the switch on the back https://dahuawiki.com/Doorbell/DB11/Factory_Reset
  28. Galaxy Explorer

    Dahua's DSS Express or Pro

    I would like to know the answer to that too.
  29. Galaxy Explorer

    Review-Dahua DB-11 Video Door Bell

    All features work as expected. I'd check all the basic configuration settings in the Imou app. Have you inserted an SD card? Can it be formatted and read through the app? I am not using a mechanical doorbell however plenty of people do without issue. Visit the Dahua DB11 Wiki page which provides...
  30. Galaxy Explorer

    Review-Dahua DB-11 Video Door Bell

    Unsure. My DB11 was purchased in the UK using so called PAL firmware but I've since upgraded to North American firmware without issue. I'd suggest waiting a couple of days to see whether it appears rather than rolling back to an old version.
Top Bottom