Vcs-sh30 ip speaker

No need to post in 3 different forums.
 
Looks like the NVR and the speaker need certain level of firmware:

D

Post in thread 'Mini-review: Dahua VCS-SH30 PoE speaker'

ATX said:
I bought the Dahua VCS-SH30 PoE speaker from @EMPIRETECANDY a while back and finally got around to mounting it outside.

For pole mounting I used the PK-088 kit from Polycase.

The speaker has 512MB internal memory and supports expansion via MicroSD slot. I installed a Samsung Pro Plus 128GB MicroSD and the full capacity is recognized.

Speaker amp power is 15W, which is plenty loud for my use.

The SIP protocol support is pretty useless (to me) as it limits you to 8KHz audio (G.711 codec).

Best audio quality is achieved by uploading MP3s to the speaker and playing from...
Click to expand...
 
TonyR said:
Looks like the NVR and the speaker need certain level of firmware:

D

Post in thread 'Mini-review: Dahua VCS-SH30 PoE speaker'

ATX said:
I bought the Dahua VCS-SH30 PoE speaker from @EMPIRETECANDY a while back and finally got around to mounting it outside.

For pole mounting I used the PK-088 kit from Polycase.

The speaker has 512MB internal memory and supports expansion via MicroSD slot. I installed a Samsung Pro Plus 128GB MicroSD and the full capacity is recognized.

Speaker amp power is 15W, which is plenty loud for my use.

The SIP protocol support is pretty useless (to me) as it limits you to 8KHz audio (G.711 codec).

Best audio quality is achieved by uploading MP3s to the speaker and playing from...
Click to expand...
Click to expand...
Which firmeware version need
 
You need a latest new fw for the speaker and only NVR5-EI series with special fw can support. Have to ask your supplier to send you the fw, different NVR have different fw.
 
Last edited:
You must log in or register to reply here.
Top Bottom