Recent content by Galaxy Explorer

  1. Galaxy Explorer

    Honeywell Performance series Nvr reset.

    That looks like the 3rd generation, so I wouldn't recommend it. Try contacting Honeywell support and request the firmware from them.
  2. Galaxy Explorer

    Honeywell Performance series Nvr reset.

    Firmware for HEN16102 attached.
  3. Galaxy Explorer

    Honeywell Performance series Nvr reset.

    Previously there was a backdoor to reset the password however if the firmware was patched you'll need to connect over serial to erase the configuration. I've created a guide on how to do it, based on information found elsewhere.
  4. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Most likely not, I don't know for sure but most likely the regional versions differ in WLAN power levels. NA/Canada regulations allow for much higher power levels than Europe.
  5. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Just place the .bin file on the root. Alternatively, try the ConfigTool method.
  6. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Try the SD card recovery procedure
  7. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Enter the details into the camera search box/window which is using top right of the screen.
  8. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Username = "admin" Password = <safety code printed on the camera/doorbell label>
  9. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    I didn't realise the wired version also had an internal battery! :) ... I must say it doesn't get very hot here in London but I can see how that could be problematic with direct sunlight.
  10. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    This is a common problem with all Lithium Ion batteries, so it's not a Dahua thing. I have the non-battery (hard wired) version, I'd recommend that one! :)
  11. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    The DB61 is so underrated, it's far better than anything else on market. Local storage, local API, image resolution is far superior, etc.
  12. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    It was pushed from Imou. I did ask Imou support for a copy of the binary but they refused. You could try loading the previous binary as per my earlier post and with any luck you may receive this update. Note these files are European firmware so it may differ for North America versions, typically...
  13. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Yes I've seen this for RTMP streaming also, AAC is the most compatible.
  14. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    I can't imagine why it shouldn't work if you can successfully stream over RTSP and ONVIF. My DB61 is connected to HA using Dahua API and ONVIF without issue. ONVIF provides some additional features. e.g. reboot. I did see a situation in the past where the RTSP failed when complex passwords with...
  15. Galaxy Explorer

    DH-DB6I Doorbell warning, DO NOT UPGRADE FIRMWARE!

    Yes, it works nicely as you describe. doorbell_alarm_local goes to unsafe when the call button is pressed It doesn't work for me neither but the general doorbell_motion_alarm works perfectly I'm not entirely sure but it could a compatibility issue with the encoding, try using basic H264 by...
See more
Top Bottom