Recent content by AusGuy
-
Camera Issue's After Power Down
OK so just just did the same thing i did with camera 2 and it allowed me to activate the camera and set the IP, that's also now working. Thank you everyone again for your help, I'd be stuffed without you! -
Camera Issue's After Power Down
I just got camera 2 working, i found a YouTube video showing how to change my internet IPv4 setting and then i was able to change the IP address in SADP and it's now working! Yes, i still don't know why the spare camera won't learn an IP as you say, i have it set to Plug&Play and do a reset and... -
Camera Issue's After Power Down
So I've kept playing around, I changed the IP on camera 2 through the NVR web GUI, that then changed it on the NVR screen, set the password, still no go. You can see i set it to .10 is the first screen shot, after loading SADP, it changed to .41. You can see though that SADP still shows a... -
Camera Issue's After Power Down
Thanks again for this help! So i tried the above, only one camera's IP matched what SADP said. So i had to change it to manual and put the password in, but it WORKED! So two others i had to change the IP on the NVR to match what SADP said, as trying to change it on SADP gave an error. So i have... -
-
Camera Issue's After Power Down
Noticed the IPv4 address doesn't match. -
Camera Issue's After Power Down
I have one original camera in port 3 and the one i reset in port 5. -
Camera Issue's After Power Down
I've tried resetting the spare cam, it's stuck on detecting IP camera. -
Camera Issue's After Power Down
Just to clarify, i powered them off and back on to reboot them, so i can access the NVR via web browser with them both on. I also put another spare camera into slot 5 on the NVR and put the password in and then still get the network unreachable error on that too. So somehow, me hot swapping... -
Camera Issue's After Power Down
Just another update, i powered off the router and the NBN box and can now access the NVR via the network at least. -
Camera Issue's After Power Down
Just to add, i lost remote connection with the camera's around last Thursday. I've since discovered the power supply must have died at around 12.30am Saturday, as i can view recordings till then. I also cannot login to the NVR on PC. So maybe there has been/is a network issue. This is what i... -
Camera Issue's After Power Down
Hi mate, thanks for helping again. No, all the camera's have the same password. So i know when i try manual, that it is the correct password. -
Camera Issue's After Power Down
While away on holidays last week i noticed i couldn't view my cameras. Once home i found the unit off, I've just replaced the power supply and go it going again. On first power up, i had 3 camera's working but in the wrong order on the screen(i don't have to cables labeled) so swapped them... -
No Live View on PC
Yeah I did try but it wouldn’t allow me to select it. After V4 I did most via the web GUI and all worked well, that after the one before I ended up with the web GUI changed and the upgrade section was greyed out. So did the V4.6 plugged direct to NVR, but it wouldn’t accept any more updates...