AusGuy's latest activity
-
AusGuy replied to the thread Camera Issue's After Power Down.OK so just just did the same thing i did with camera 2 and it allowed me to activate the camera and set the IP, that's also now working... -
AusGuy replied to the thread Camera Issue's After Power Down.I just got camera 2 working, i found a YouTube video showing how to change my internet IPv4 setting and then i was able to change the IP...
-
AusGuy replied to the thread Camera Issue's After Power Down.So I've kept playing around, I changed the IP on camera 2 through the NVR web GUI, that then changed it on the NVR screen, set the...
-
-
AusGuy replied to the thread Camera Issue's After Power Down.Thanks again for this help! So i tried the above, only one camera's IP matched what SADP said. So i had to change it to manual and put...
-
-
AusGuy replied to the thread Camera Issue's After Power Down.Nope, won't find that address.
-
AusGuy replied to the thread Camera Issue's After Power Down.Noticed the IPv4 address doesn't match.
-
AusGuy replied to the thread Camera Issue's After Power Down.I have one original camera in port 3 and the one i reset in port 5.
-
-
AusGuy replied to the thread Camera Issue's After Power Down.
-
-
AusGuy replied to the thread Camera Issue's After Power Down.I've tried resetting the spare cam, it's stuck on detecting IP camera.
-
-
AusGuy replied to the thread Camera Issue's After Power Down.Just to clarify, i powered them off and back on to reboot them, so i can access the NVR via web browser with them both on. I also put...
-
AusGuy replied to the thread Camera Issue's After Power Down.Just another update, i powered off the router and the NBN box and can now access the NVR via the network at least.
-
AusGuy replied to the thread Camera Issue's After Power Down.Just to add, i lost remote connection with the camera's around last Thursday. I've since discovered the power supply must have died at...
-
-
AusGuy replied to the thread Camera Issue's After Power Down.Hi mate, thanks for helping again. No, all the camera's have the same password. So i know when i try manual, that it is the correct...
-
While away on holidays last week i noticed i couldn't view my cameras. Once home i found the unit off, I've just replaced the power...
-
AusGuy replied to the thread No Live View on PC.Yeah I did try but it wouldn’t allow me to select it. After V4 I did most via the web GUI and all worked well, that after the one before...
-
AusGuy replied to the thread No Live View on PC.So i got up to V4.6 and it wont do anymore, I'll call it there anyway, thanks for all the help!
-
AusGuy replied to the thread Live View Password.You’ve done it again! So that setting above was there all along, now that my own unit is on V4 I had a play and found that you have to...
-
AusGuy replied to the thread No Live View on PC.One issue I’ve just noticed, Hik-connect app is showing offline. I’ve checked and find the platform access setting is still enabled. The...
-
AusGuy replied to the thread No Live View on PC.OK so I tried using .dav direct to the NVR and it's working, I just went to V4....and it's working, now looks like my parents menu...
-
AusGuy replied to the thread No Live View on PC.OK so i tried it, still failed. Looks like it's stuck with this or i upgrade the NVR if i wanna run a Colorvu camera.
